Experience a living history of legendary tone in a compact, stage-ready format. The Mesa/Boogie Mark Five: 35 Tube Amp Head crams decades of iconic Mark Series preamp engineering into a portable, 4 x EL84-powered platform. Hand-wired in Petaluma, California, this 35-watt powerhouse delivers the ultimate balance of pristine headroom, aggressive high-gain clip, and modern gigging flexibility. Wrapped in a rugged Black Bronco vinyl with a sleek aluminum chassis, it is built to anchor your rig on stage, in the studio, or at home.
Features That Define the Tone
-
Two Channels, Six Modes: Channel 1 spans the gain spectrum with Clean, Fat, and Crunch modes—taking you from crystal-clear chime to classic rock crunch. Channel 2 unleashes the roaring high-gain heritage of the legendary Mark IIC+, the warm singing sustain of the Mark IV, and the hyper-saturated Extreme mode from the Mark V.
-
Multi-Watt™ Channel Assignable Power: Tailor your headroom and response on a per-channel basis. Dial in maximum punch and clarity at 35 Watts (Dyna-Watt™ Pentode), dynamic push-pull response at 25 Watts, or switch down to 10 Watts (Class A/B Triode) for lush, liquid harmonics at bedroom-friendly volumes.
-
Legendary 5-Band Graphic EQ: Sculpt your signature sound. The classic Boogie® 5-Band Graphic EQ is fully assignable to either channel, footswitchable, or completely bypassable.
-
Independent Solo™ Boost Controls: Never get buried in the mix. Separate, footswitchable Solo controls for each channel allow you to preset a dedicated volume boost that cuts through the band for lead work.
-
Built-in CabClone™ D.I. & Silent Recording: Skip the microphone. The integrated CabClone cabinet simulator and internal load box allow you to run a direct XLR signal straight to the front-of-house console or your studio interface. Choose between Closed-Back, Open-Back, or Vintage virtual-cabinet voicings for seamless silent recording.
-
All-Tube Spring Reverb: Drench your tone in wide, ambient space courtesy of a genuine, tube-driven long-tank spring reverb with independent controls on the rear panel
Technical Specifications
-
Type: Tube
-
Build Location: Hand-wired in Petaluma, CA
-
Wattage: 35W, 25W, or 10W (Channel Assignable)
-
Preamp Tubes: 6 x Mesa 12AX7
-
Power Tubes: 4 x Mesa EL-84
-
Channels: 2 Independent Channels / 6 Modes
-
Effects Loop: Fully Buffered Series FX Loop
-
Outputs: 1 x 8-Ohm, 2 x 4-Ohm speaker outputs; 1 x XLR (CabClone DI); 1 x 1/4" Headphone jack
-
Cabinet Material: Marine-Grade Baltic Birch
-
Dimensions: 9 1/8" H x 18 3/4" W x 10 7/8" D
-
Weight: 27 lbs.